LumaVu Assembly Guide  


Locate the 4 wheels for the base piece and turn base piece over. Screw the wheels in by hand, ensuring that the two wheels with a locking mechanisms go on the back, while the two wheels without a locking mechanisms go on the front.   

Turn the base piece back over so the wheels are on the ground. Place the Pedestal onto the base, and use the 4 thumb screws to secure the pedestal from the bottom.

Finally, loosen the Allen head screws on the VESA mount on each side of the pedestal, and adjust to the desired height. Tighten the screws, and mount the digital signage on the pedestal, ensuring all screws are tight.  


Slideshow Setup:

You may  the SlideShow attachment for details on loading content.