You may view the attached photos to assemble your HootBooth ILLUMIN8 Unit:

  1. Use the two provided thumbscrews to secure the Pedestal to the Base Piece
  2. Slide the ILLUMIN8 Top unit onto the mount at the top of the Pedestal
  3. Insert your 9.7" iPad into the Top unit. Run the lightning cable through the provided hole and plug into the iPad.
    1. Put iPad cover in place and secure using the locking plunger
  4. Plug in the two wires:
    1. One for the Ring Light power and 
    2. One for the iPad power
  5. Coming out of the bottom of the Pedestal are the Ringlight power cable and the iPad power cable. These should be plugged into a power strip as shown.