The following will guide you through assembling your Illumin8 ROVR unit.


1) Install your 10.5" iPad. 

    Open the back of the top piece by removing the 8 thumb screws

    Insert your iPad and attach the lightning cable to the USB cable as shown below


2) Mount the top piece onto the pedestal as shown below


3) Attach the battery pack to the top piece (insert into the 12v slot) as shown below

    


4) Turn on the iPad by inserting your finger into the hole on the back of the top piece as shown below


5) The red button above the handle controls the ring light. 

    Holding the button down will adjust the brightness

    Pressing the button twice will change colors/patterns